What you see

  • A project has no Duct Layout stage, or no Building Model stage.
  • A new project has fewer stages than "Stages this project will get" listed on Add Project.
  • The stage is there but its Open Duct Layout or Open Building Model button is gone.

Why it happens

  • No Duct Layout or Building Model stage: a project gets these stages only if the module was switched on for your company when the project was created. Both modules start off, and DuctArchitect must also turn them on for you.
  • Fewer stages than the preview: the preview does not follow your firm type or Work Stages Configuration, and it always lists Building Model. The project gets the stages for your firm type and settings. See Which stages a new project gets.
  • The button is gone: the module was switched off after the stage was created. The stage stays; only its button hides.

What to do

  1. Ask an Owner or Admin to check that Building Model or Duct Layout is switched on. See Switch a module on or off. New projects then get the stage.
  2. For a project that has no Duct Layout stage, add it. See Add the Duct Layout stage to an older project.
  3. For a project that has no Building Model stage, there is no button to add it. Create the project again if the stage is needed.
  4. If other stages are missing, check your firm type and Work Stages Configuration. See Choose which work stages new projects can include.

If it still happens

  • If the module is on and a new project still has no stage for it, submit a request with the project name.