What you see
- In the footer: "Capacity: [selected] of [required] TR, short by [number] TR" or "oversized by [number] TR", or the same for airflow in CFM.
- On a space's row in the Units per space table: "[number] TR short" (red) or "[number] TR oversized" (amber).
- On the project's Selected AC systems: the verdict in place of "met ✓".
Why it happens
- Short: the chosen units add up to less than the required TR or CFM.
- Oversized: they add up to more than the required load by over the limit the page uses, 20 percent.
- A Best Match card reads oversized: a single recommended unit may be up to 1.5 times the required TR, while the footer verdict uses the 20 percent limit.
The verdicts compare your choice with the heat load. They are not advice on which unit to buy.
What to do
- Change the quantities or units on the Choose card until the verdict reads "met".
- For airflow, check the design airflow. See Set the design airflow.
- Save the selection. See Save your equipment selection.
If it still happens
- If your design accepts the verdict, you can still save.
- If the required TR looks wrong, check the project's heat load. See Read a space's heat load results.
