The panel reads "The system type comes from the project setup. The design stages below follow from it." Under From project setup it shows "Cooling: [system]" and "Heating: [system]", or "No system type set on this project."
States
| What you see | Heading | Note | Button |
|---|---|---|---|
| Not confirmed yet | "System summary" | none | Confirm system |
| Confirmed | "System confirmed" (folded) | none | Change |
| Set automatically | "System confirmed" | "Set automatically from project setup." | none |
| Saved before system types | "System confirmed" | "Set before system types were introduced." | Update to match system type |
| No known system type | "System summary", or "System confirmed" once saved | "Set manually." when saved | Confirm system, or Change once saved |
The link Change system type in project setup opens Edit Project. See Edit a project.
Stage chips
| Chip | Included | Not needed |
|---|---|---|
| Ductwork Planning | "Air is distributed through ducts." | "No ducted air on this project." |
| Pipe Recommendation (the Pipe Sizing stage) | "Water circuits: chilled water.", "Water circuits: hot water.", "Water circuits: chilled and hot water.", or "Set manually." for an unknown system | "No water circuits. Refrigerant piping is sized from the manufacturer's selection data and is not part of Pipe Recommendation." |
Until the system is confirmed, an empty Ductwork Planning or Pipe Sizing stage reads "Awaiting system selection". After it, a stage that is not needed is hidden, or reads "Not applicable to selected system" if it holds work.
Questions the panel can ask
| Question | When | Help text for Yes / No |
|---|---|---|
| "Are any indoor units ducted?" | VRF / VRV | "Concealed ducted units or ducted fresh air." / "Cassette and hi-wall units only." |
| "Is any air ducted on this project?" | Chilled water | "AHUs with ductwork, ducted FCUs or ducted fresh air." / "Unducted FCUs only." |
| "Is any air ducted on this project?" | Hot water heating | "Hot water coil in an AHU or ducted fresh air." / "Radiators, underfloor or unducted FCUs only." |
| "Water circuits on this project?" and "Ducted air on this project?" | No known system type |
Every question needs an answer before Confirm system works: "Answer both questions to continue." or "Answer the remaining questions before confirming".
