What you see
After Get Recommendations, one of these:
- "Smallest units that cover [number] TR" / "Every available unit is larger than this load. The closest sizes are shown first. Oversizing is normal for small rooms."
- "Showing Closest Available Options" / "No single unit or combination reaches the required [number] TR. The options below are the closest available units from your inventory. Consider adding more inventory items."
- "Multi-Unit System Required" / "No single AC unit can meet the required cooling capacity of [number] TR. The following multi-unit combinations provide the necessary cooling capacity to meet your project requirements."
Why it happens
- "Smallest units that cover": every unit in your items is bigger than the load.
- "Showing Closest Available Options": no unit, and no combination of units, reaches the load. The cards tagged Closest Match come nearest.
- "Multi-Unit System Required": no single unit is big enough, but 2 to 5 units together are. The best combination is shown, with Coverage and Oversizing; combinations are oversized by at most 20 percent.
What to do
- For a combination, set the quantities of each machine it lists on the Choose AC Systems card, then save there. See Choose ducted units on the block load.
- For closest options, add larger units to your items, or choose several units on the Choose card. See "No equipment found" or "Type not set".
- For the smallest units, choose one of them on the Choose card, or add smaller units to your items.
- Save the selection. See Save your equipment selection.
If it still happens
- You selected Add All to Task on the combination and nothing was saved: see Remove adds a unit, or Add All to Task did not save.
- Otherwise, submit a request with the project name.
