Before you start
- You need View on Duct and load calculations to see the card. Adjust in Heat Load also needs Operation Management.
- The project has a Ventilation & Fresh Air Planning stage. See Which stages a new project gets.
Steps
-
Open the project's Ventilation & Fresh Air Planning stage. See Open a stage and its tool.
-
Read the card Fresh-air figures · from Heat Load: Spaces, Total Area and Cooling Load.

Step 2. The Fresh-air figures card with Spaces, Total Area, Cooling Load and Adjust in Heat Load. -
To change the fresh air, select Adjust in Heat Load. The project page switches to the Heat Load Calculation stage.
-
Open the HVAC Spaces screen from the stage (see Calculate the heat load for a project), open the space, go to Conditions and open Engineering settings: ventilation & ADP.
-
Change Fresh air (CFM/person) or Air change (ACH).
-
Select Calculate.
Result
The space's results use the new fresh air. The Ventilation card's figures come from the Heat Load stage summary.
If something is different
- "Not yet calculated. Complete the Heat Load stage first.": calculate the project's spaces first. See Calculate the heat load for a project.
- "[number] room(s) from the building model is/are waiting to be calculated": "The totals below cover calculated rooms only." Select Open the drafts. See Calculate the draft rooms from the Building Model.
- No Adjust in Heat Load button: you do not have View on Duct and load calculations.
- The Review checklist did not save: see The survey or review checklist did not save.
