What you see

  • Above the project header: "[number] space(s) in this project was/were calculated before a correction to the heat-load engine. The stored figures are unchanged." with Review corrected figures.
  • On a space's results: "This result predates a calculation fix, see the corrected figures".

Why it happens

The heat-load engine was corrected after these spaces were calculated. Their saved figures were left as they were, so nothing changed behind your back.

What to do

  1. Select Review corrected figures on the banner, or the link on the space's results.
  2. Compare the corrected figures with the saved ones.
  3. To keep the corrected figures, open the space and select Calculate again. See Change a space and calculate it again.
  4. Check anything that used the old figures, such as the AC systems chosen for the project.

If it still happens

  • No Review corrected figures button or link: you need Edit on Duct and load calculations.
  • If the banner stays after every space is calculated again, submit a request with the project name.