What you see
- "Below recommended range: duct may be oversized." with Fix it.
- "Above recommended range: expect noise and higher fan energy." with Fix it.
- On SI: "Warning: Velocity should be between 3-9.5 m/s for optimal performance."
Why it happens
The duct's velocity is outside the range the gauge uses. Duct Sizing shows three different velocity ranges in different places; each is listed in Friction bands and velocity ranges, as each screen shows them. DuctArchitect does not present them as a recommendation or a standard.
What to do
- Select Fix it on the gauge.
- Or change the friction loss or the size, and watch the gauge. See Size a duct by friction loss or by velocity.
- Or switch to Size by velocity and set the Target Velocity you want.
If it still happens
- "Please enter valid velocity range.": the target velocity is outside what the field accepts, for example below 590 FPM or 3 m/s.
- Otherwise, submit a request.
